SUPER73-M1D in Tampa Bay: Fit, Range and Your Test Ride

SUPER73-M1D Core in Slate, front three-quarter view

The SUPER73-M1D Core in Slate has a 30-inch seat height and a listed vehicle weight of 88 lb. Those two facts should guide your first questions. Can you place your feet where you want them? Can you store and lift the bike safely? Is the stated battery range enough for your own route?

Readers in Tampa, Dunedin, and St. Petersburg can use this guide before viewing the product page or calling a showroom. It explains the current specifications and what to check in person.

SUPER73-M1D Core in Slate, front three-quarter view.

Ready to review the product page?

Check the current price, color, delivery information, and product details before making a decision.

View the SUPER73-M1D Core in Slate

SUPER73-M1D Core specifications

The shop price was $2,495 in Slate when checked on September 26, 2026. Price, delivery, and product information can change, so confirm the current page before ordering.

Feature Details
Motor 500W nominal
Class and speed Class 2; 20 mph top speed
Controls Thumb throttle; single-speed drivetrain
Battery 520Wh, 52V 10Ah
Charge estimate 5–6 hours from the manufacturer
Frame and suspension Aluminum frame; rigid front and rear
Brakes and tires Two-piston hydraulic brakes; BDGR tires, 4.5-inch front and 5-inch rear
Size and weight 66 x 28.5 x 41 inches; 88 lb
Seat and rider guidance 30-inch seat height; suggested rider height 5’2″–6’2″
Rider limit 250 lb rider weight limit
Equipment LED headlight, LED taillight, horn, analog display

Battery range and the optional upgrade

The included battery is one 520Wh unit. The manufacturer lists 20+ miles at 20 mph under Class 2 throttle-only operation. This is an estimate, not a promised everyday distance.

A compatible modular secondary battery may support a listed dual-battery estimate of 40+ miles under the same conditions. The second battery is sold separately. Two batteries are not included with the Core model. Ask Tampa Bay eBikes about compatible secondary battery availability. Do not assume an exact double range in daily use.

Weight, speed, temperature, wind, tire pressure, terrain, and incline affect range. Budget your route around your own conditions and leave a margin for the return trip. The manufacturer charge estimate is 5–6 hours.

SUPER73-M1D Core in Slate, full side profile with rigid frame

SUPER73-M1D Core in Slate, full side profile.

Controls and rigid frame details

The Core uses a thumb throttle, a single-speed drivetrain and an analog display. Check the controls and assistance response during your test ride.

The M1D uses a rigid fork and frame, with no front or rear suspension. Its wide tires do not replace suspension components. This matters when you compare the bike with models designed around suspension components. The bike also uses two-piston hydraulic brakes, LED lighting, and a horn.

SUPER73-M1D Core analog display and left handlebar grip

SUPER73-M1D Core in Slate, handlebar and analog display close-up.

Fit, storage, and ownership checklist

The suggested rider height is 5’2″–6’2″, but it is guidance rather than a fit guarantee. A 30-inch seat height can feel different from a standard bicycle. Check reach, ground contact, slow handling, and your ability to control the bike before purchase.

  • Confirm that the seat height works for your leg length.
  • Plan for the full 88 lb weight when lifting or moving the bike.
  • Measure a doorway, storage space, and charging area.
  • Check rack capacity and compatibility before transporting it.
  • Use the 250 lb figure as the rider weight limit, not a payload capacity.
  • Confirm any intended passenger setup with the manufacturer and shop.

Who this bike may suit

This model may suit a rider who wants a distinctive aluminum-frame bike, a 30-inch seat, thumb-throttle control, single-speed operation, and local assembly or service help. It may also suit a buyer who prefers a Class 2 configuration with a 20 mph top speed.

The tradeoffs are clear. At 88 lb, it is not a lightweight bike. The rigid frame may not match a buyer seeking suspension components. The stated range depends on conditions, and the optional secondary battery is sold separately. A careful fit and storage check should come before the price decision.

SUPER73-M1D Core in Slate, rear view showing bench seat and taillight

SUPER73-M1D Core in Slate, rear high three-quarter view with seat and taillight.

Local help in Tampa Bay

Tampa Bay eBikes offers professional assembly, a safety inspection, and local service. Call ahead for the exact model and test-ride availability. The bike may not be present at every showroom.

  • Tampa showroom: 4004 S MacDill Ave, Unit 6, Tampa, FL 33611
  • Dunedin showroom: 376 Patricia Ave, Dunedin, FL 34698
  • St. Petersburg showroom: 4116 S 8th Ave, Unit B, St. Petersburg, FL 33711

View showroom locations and contact information

727-228-1975

Email: Support@TampaBayeBikes.com

Compare the fit before you buy

Use the product page for the current price and ask the shop about fit, assembly, service, and secondary battery compatibility.

Check Current Price and Details

SUPER73-M1D Core FAQs

Is the second battery included?

No. The Core includes one 520Wh battery. A compatible modular secondary battery is sold separately. Ask the shop about availability.

What is the seat height?

The seat height is 30 inches. The suggested rider height is 5’2″–6’2″, but riders should check reach and ground contact in person.

Is the frame suspended?

No. The SUPER73-M1D Core uses a rigid fork and frame without front or rear suspension.

Review the SUPER73-M1D Core in Slate

Confirm the current price and product information, then call Tampa Bay eBikes before traveling for a test ride.

Shop the SUPER73-M1D Core

Sources

Product facts and specifications were checked September 26, 2026. Information may change after that date.

Tampa Bay eBikes product page

Official SUPER73-M1D manufacturer page